Use your drill to secure the top-most hinge with a screw.
The use of shims under the door may help with the alignment when connecting the hinges.
Note: If replacing door by yourself, be careful not to hurt yourself.
Ask a Question 200 characters left Submit Tips Get a nice looking fit on the hinge side - and the opening side of the "Z" bar - by placing a bevel square along the top of the door sill.Part 2 Installing the Door 1, install the drip cap.Installing An Exterior Door Sweep, taking the time to learn how to install a door sweep not only cuts down kitchenaid mixer rebate sears on those uncomfortable cold door drafts but can reduce your energy costs.Once attached, the hinge-side z-bar will usually extend beyond the bottom of the door frame.The hinge-side z-bar is an aluminum component which attaches to the hinge-side of the storm door.
Allow 18 inch (0.3 cm) of the z-bar to extend above the top of the door - this ensures that the top of the door clears the drip cap upon closing.
If this is the case, you should hold off on installing the drip cap for now - always follow the manufacturers instructions.
Staple-On Door Bottoms or Sweeps: video determine which door bottom is needed.
3 Install the closer mechanism.
Most exterior doors are 1-3/4" thick.2 2, get measurements for your storm door.This excess will need to be removed to ensure that the door frame fits into the opening.Remove the screws on the existing door bottom.You will need: Materials: Storm door unit, #8 x 1" screws.Always follow the manufacturer's instruction for installation.